Search
United Kingdom +44 (0)1908 316345
United States +1 (210) 697 0335
sales@sonatest.com

Partnership Products

Ultrasonic Testing Boards

Ultrasonic Pulser/Receiver and 100MHz A/D Board for PCI Bus with DSP. On board DSP Chip for worlds fastest ultrasonic data processing. One-Board Design: Pulser/receiver and A/D converter on one PCI board. 32-bit master mode PCI bus for ultra-fast data transfer. Ultratek DSPUT5000
Ultrasonic Pulser/Receiver and 100MHz A/D Board for PCI Bus with DSP. On board DSP Chip for worlds fastest ultrasonic data processing. One-Board Design: Pulser/receiver and A/D converter on one PCI board. 32-bit master mode PCI bus for ultra-fast data transfer.
     
PRM is a 4-channel pulser/receiver board for the PCI bus. It generates an electrical pulse with a user-defined pulse voltage and pulse width through one of the 4 channels. The pulse is transmitted to an ultrasonic transducer, which converts the electrical excitation pulse to an ultrasonic pulse. The pulse is then propagated into either couplant or the material to be tested. The transducer also receives the echoes reflected from the interface and converts the ultrasonic pulse back into an electrical signal. The on-board receiver processes the signal with the user-defined parameters.   Ultatek PRM
PRM is a 4-channel pulser/receiver board for the PCI bus. It generates an electrical pulse with a user-defined pulse voltage and pulse width through one of the 4 channels. The pulse is transmitted to an ultrasonic transducer, which converts the electrical excitation pulse to an ultrasonic pulse. The pulse is then propagated into either couplant or the material to be tested. The transducer also receives the echoes reflected from the interface and converts the ultrasonic pulse back into an electrical signal. The on-board receiver processes the signal with the user-defined parameters.
     
UTM is a combination of a 4-channel pulser/receiver and a high-speed analogue to digital converter on a single PCI board.   UltratekUTM
UTM is a combination of a 4-channel pulser/receiver and a high-speed analogue to digital converter on a single PCI board.
 
Sonatest Limited has one over-riding and driving motivation - to design, manufacture and market the worlds best 'Non Destructive Evaluation'  (NDE or NDT) products. From our UK based HQ, we design and produce a wide range of high performance ultrasonic equipment  and NDT accessories, employing cutting edge technology in our range of non-destructive testing equipment.
News
News Feed Bookmark and Share
Copyright 2010 Sonatest Limited | Shipping and Returns | Disclaimer | Privacy and Data Protection Policy | Site Map